When planning a winter vehicle-testing programme, one of the first decisions is where each test should take place. Frozen lakes provide large, open surfaces with natural snow and ice, while land-based tracks offer earlier access and more varied terrain. Both have distinct strengths, and many programmes use them together. Their different characteristics affect the available layouts, testing season and types of vehicle test that can be performed.

What Is the Difference Between Lake and Land-Based Test Tracks?

A lake test track is prepared directly on the surface of a frozen lake. Once the ice has reached a safe thickness, sections can be cleared, compacted, graded, roughened or polished to create different grip levels. The large, level surface can accommodate circular tracks, handling courses, long straights and layouts prepared for a particular test programme.

A land-based winter track is built on solid ground and prepared with compacted snow, ice or a combination of winter surfaces. Because land tracks do not depend on a lake reaching a safe ice thickness, testing can often begin earlier in the seasonโ€”sometimes as early as November in northern Sweden. They can also use the natural terrain to provide slopes, crests and uneven surfaces that a frozen lake cannot reproduce.

Why Frozen Lakes Are So Well Suited to Vehicle Testing

  • Naturally level surface: With no slopes or uneven terrain affecting the vehicle, engineers can compare braking, steering and stability across repeated runs.
  • Customisable friction levels: Ice can be polished, graded or covered with compacted snow to create different levels of grip.
  • Combined surface conditions: Multiple surfaces can be used within one layout for split-ยต braking and sudden grip transitions.
  • Clearer calibration differences: Low friction makes small changes to ABS, ESC, tyres and vehicle setup easier to detect.
  • Flexible layouts: Straights, circles and handling courses can be shaped around specific testing objectives.

How Is a Lake Test Track Prepared?

Preparing a lake test track begins well before the first test vehicle arrives. At Icemakers, the first phase normally starts in mid to late November. Ice thickness is measured regularly using sonar equipment to determine when different machines can safely enter the lake.

Once the ice can support snowmobiles, the proposed tracks are marked using GPS and plough sticks. Icemakers mainly uses willow sticks for this work to avoid leaving plastic in the lake or along its shores.

Fresh snow creates the next challenge. Light snow acts as insulation and can slow the growth of the ice beneath it. Snowmobiles and rollers are therefore used to compact the snow, reduce the insulating layer and help the ice continue to thicken.

By late December or early January, the ice is normally strong enough to support smaller machines equipped with snow blowers. Heavier equipment can be introduced as the ice grows thicker and safety measurements permit.

The finished surface can be prepared in several ways. Snow may be compacted to provide more traction, while sections of ice can be graded, roughened or polished to create lower-friction conditions. Different surfaces can also be combined within one layout. A dynamic straight, for example, may include compacted snow, graded ice and polished ice for split-ยต testing.

The lake is natural, but producing a safe and consistent test surface on top of it requires continuous measurement, suitable machinery and experienced preparation crews throughout the season.

Differences Between Lake Test Tracks and Land-Based Winter Tracks

Lake test tracks

Land-based winter tracks

Testing season Open once the lake has reached a safe ice thickness Can often open earlier (November), extending the winter testing season
Terrain Naturally level and free from elevation changes Can include hills, slopes and uneven terrain
Surface conditions Polished ice, graded ice and compacted snow Packed snow, polished ice, graded ice, heated asphalt and mixed surfaces
Main strengths Controlled low-friction testing and continuous driving at constant speeds Hill starts, traction on gradients and sudden changes in grip
Typical layouts Circular tracks, dynamic straights and handling courses Handling courses, hills and split-friction straights
Common applications Vehicle dynamics, braking, tyres, ABS and ESC calibration Traction, drivetrain development, mixed-surface braking and early-season calibration

Which Winter Track Should You Use?

The right track depends on the conditions required by the test plan. Lake tracks provide level, configurable ice surfaces suited to vehicle dynamics, braking, tyre development, powertrain testing and ESC calibration. Land-based tracks are better suited to gradients, uneven terrain, mixed surfaces and testing earlier in the winter season.

Neither is inherently better. The two environments answer different development needs, so the choice should be made test by test. Many winter programmes use both: land tracks extend the season and provide terrain that cannot be created on a lake, while lake tracks offer the space and level low-friction surfaces required for other manoeuvres and calibrations.

Lake and Land-Based Winter Testing with Icemakers

Icemakers prepares roughly 1.3 million square metres of winter test tracks each season: more than 900,000 square metres on frozen lakes and approximately 400,000 square metres on land. Available lake layouts include dynamic straights, circular tracks and handling courses, with custom preparation based on the requirements of each programme.

The land-based tracks extend the testing season and provide access to gradients, uneven terrain and mixed-friction sections. Together, the two environments allow development teams to build a broader winter programme without treating lake and land testing as an either-or decision. Explore Icemakersโ€™ lake test tracks and plan your next winter testing programme.